Network Video Technologies NVT 216APV Passive Transciever For Pwr

$63.91 & Free Shipping

Power-Video (PV) signals are routed via UTP and RJ45
Use with NVT’s PVDTM Power Supply Hubs and Cable Integrators, or with a second NV-216A-PV
Up to 750ft (225m) with a NVT Passive Hub or Transceiver

Only 20 left in stock

SKU: NV-216APV Categories: CCTV, CCTV Accessories

Description

NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Supports baseband (composite) signals of any type.

NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT’s popular NV-214A-M video transceiver with the added value of camera power connections. Routs Power and Video via UTP and RJ45 connections.

Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT’s PVD™ product line. Connect the RJ45 to 4-pair cable to be routed to the NVT Phybridge cable integrator and on to an active or passive receiver hub in the MDF/Control Room.

Passive Transceiver Features

Power-Video (PV) signals are routed via UTP and RJ45
Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
Use with NVT’s PVDTM Power Supply Hubs and Cable Integrators, or with a second NV-216A-PV
Up to 750ft (225m) with a NVT Passive Hub or Transceiver
Frequency response DC to 10MHz (see Resolution Distance Chart)
Supports “up-the-coax” type control signal up to 750ft (225m)
Up to1,500ft (460m) with a NVT StubEQTM Hub
Exceptional interference rejection
Built-in transient protection
Limited lifetime warranty