System Sensor RTS2 Multi-Signaling Accessory, Without Strobe, for InnovairFlex 4-Wire Conventional Duct Smoke Detectors
$179.46 & Free Shipping
- Can be used to select one of two connected sensors to be tested, reset, or both by a push button switch.
- ย Enables sensitivity measurements using the SENS-RDR sensitivity reader
Only 18 left in stock
Description
The RTS2 and RTS2-AOS multi-signaling accessories are designed to work with InnovairFlex 4-wire conventional duct smoke detectors.
These accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or both by a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately). The AOS (Add-On Strobe) is an optional accessory included with the RTS2- AOS mode.
Main Features
- Voltage 20 to 29 VDC
- Power Requirements Standby: 3.0 mA max.
- Trouble: 16.0 mA max.
- Alarm without strobe: 30 mA max.
- Alarm with strobe: 55 mA max.
- Sounder 85 dBA at ten feet
- Temperature Range โ10ยฐC to 60ยฐC (14ยฐF to 140ยฐF)
- Relative Humidity 95% non-condensing
- Wire Gauge 14 to 22 AWG
- Dimensions 4.8ห W x 5.3ห H x 1.6ห D
Additional information
| Weight | 1 lbs |
|---|---|
| Brand |
