GRI 200-36WG Floor Mount Industrial Overhead Door Switch Set, 2-1/2″ Wide Gap, 10W, 200VDC, 0.50A, Closed Loop, N/O, and 36″ Stainless-Steel Armored Cable, Aluminum
& Free Shipping
GRI 200-36WG Floor Mount Industrial Overhead Door Switch Set, 2-1/2″ Wide Gap, 10W, 200VDC, 0.50A, Closed Loop, N/O, A and 36″ Stainless Steel Armored Cable, Aluminum
Special Order
Want to be notified when this product is back in stock?
Description
The new G.R.I. extended gap series was specifically developed in response to installer request for a magnetic contact that would work on loose fitting, worn, or damaged overhead doors. The G.R.I. 250WG has an expanded area of activation which was designed for doors that don’t return to the exact or approximate position upon closure.
Ideally, the installer should determine total travel from left to right and from front to back. Locating the center position in both directions should determine the best placement of the switch.
Standard switch length is 7 1/2″ with a 36″ armored cable lead, but switch and lead can be custom ordered in any length required. All mounting hardware including lead anchors is provided as well as 1 S-12 mounting bracket for the actuating magnet. A 1/4″ masonry bit is required for lead anchor installation.
Main Features
- Designed Especially For Loose Fitting, Worn or Damaged Overhead Doors
- Expanded Area of Activation For Doors That don’t return to the exact or
- approximate position upon closure
- Standard Switch Length is 7 1/2″ with 36″ Armored Cable
- Up to 3.25″ Gap
- Extruded Aluminum Floor or Wall Mount Switch
- Custom Switch and Lead Lengths Available
- Screw Mount
- Magnet, Bracket and Mounting Hardware Included
- Lifetime Warranty
Additional information
| Weight | 1 lbs |
|---|---|
| Brand |
