Fire-Lite 4XTMF Plug-In Transmitter Module, Reverse Polarity
Special Order
- Supervisory current: 5.0 mA.
- Trip current: 0.35 amps (subtracted from Notification Appliance power).
- Coil Voltage: 3.65 VDC.
Showing 81–96 of 315 results
-
-
Fire-Lite MBT-1 Municipal Box Trip
Special Order
The Fire-LiteMBT1is a municipal box transponder module used between a local energy municipal box and a fire alarm control panel.
-
Fire-Lite XRM-24B Transformer, 120VAC, 60Hz, 3.0
Special Order
- Used as an external power source for Fire-Lite fire alarm systems
- Compact and easy to install
- Can be used with a variety of Fire-Lite fire alarm control panels
-
Fire-Lite PAM-1 Multi-Voltage Relay Module, 10A, 24VDC, 24VA
Special Order
-
Fire-Lite ECC-50DA Distributed Audio Amplifier, 50 W, 120V
Special Order
- Each unit includes four onboard fully supervised audio circuits which are expandable to eight circuits when an ECC-CE4 module is added
- Any combination of up to eight ECC-50DA(E)s or ECC-125DA(E)s per system for a total of 1100 watts of audio power and 24 speaker circuit outputs.
- Supports both Class A (Style Z) and Class B (Style Y) wiring.
-
Fire-Lite 411UDAC Fire-Watch Stand-Alone Slave Fire Alarm Co
Special Order
- Flexible and configurable to meet your communication and central station requirements.
- Four supervised monitoring channels (inputs):
- Three fixed Style B (Class B) and one Style A (Class A) or Style B (Class B).
-
Fire-Lite 90286 Optional Module Mounting Kit, 12-Piece
special Order
Mounting Bracket offers a reliable, convenient mounting solution
Circuit Board application/usage for better dependability with added efficiency -
Fire-Lite ANN-LED LED Annunciator Module with Alarm (Red), T
Special Order
- ANN-LED connects to the ANN-Bus terminal on the FACP and requires minimal programming
- Includes three LEDs for each zone: Alarm, Trouble and Supervisory.
- Compatible with the ES-200X, ES-50X, MS-9600(UD)LS, MS9200UDLS, MS-9050UD, MS-5UD, MS-10UD, MRP-2001, and MRP-2002,
-
Fire-Lite ANN-MBRLY Mounting Bracket for MS-9200UDLS Applica
Special Order
The ANN-RLY relay module provides 10 programmable Form-C relays when used with a compatible FACP (Fire Alarm Control Panel).
-
Fire-Lite ANN-SB80KIT-R Surface Mount Backbox with Angled We
Special Order
- 1 surface mount plastic back box with 2 (QTY) 1/2 โ NPT holes
- 1 surface wedge plastic accessory to provide 15 degree angled viewing
- 2 threaded plastic plugs, 1/2 โ NPT
- Mounting hardware included
-
Fire-Lite B224BI Plug in Isolator Detector Base
Special Order
WhiteIvoryFire-lite Alarms By HoneywellIsolator bases prevent an entire communications loop from being disabled when a short circuit occurs
Select options This product has multiple variants. The options may be chosen on the product page -
Fire-Lite BB-26 Battery Box for 12VDC, 26A Batteries
Special Order
- Used to mount up to two 12V DC, 26AH batteries
- Knockouts are provided to facilitate various installation options
-
Fire-Lite CAC-5X Class Converter Module for MS-5UD-3 and MS-
Special Order
- Plugs into Main Controller Board
- Convert five Class B Initiating Device Circuits to Class A
- Convert two Class B Notification Appliance Circuits to Class A
-
Fire-Lite ECC-50W-25V Audio Amplifier Module, 50W, 25V, Red
Special Order
- UL Listed to UL 2572 Communication (Control Units Mass Notification Systems) and UL 864 (emergency voice evacuation for fire)
- Modular design for system flexibility and easy expansion
- Removable terminal blocks for ease of servicing and module replacement
-
Fire-Lite ECC-RM Remote Microphone for ECC-50/100(E) Emergen
Special Order
- External remote console that provides ALL CALL paging broadcasts over the speaker zones of the ECC-50/100(E) primary operating console.
- Modular design for maximum system flexibility and easy expansion.
- Supports both Class A (Style Z) and Class B (Style Y) wiring.
-
Fire-Lite H365R-IV Addressable Heat Detector, Low-Profile In
Special Order
- Sleek, low-profile, stylish design
- State-of-the-art thermistor technology for fast response
- Integral communications and built in device-type identification
