Showing 1–16 of 110 results
$ 328.89In stock
Fully supervised trigger inputs require a contact closure for activation.
12- or 24-VDC operation, jumper-selectable.
Industry-first, UL recognized, “dialer-runaway” prevention feature.
$ 448.49In stock
Trigger inputs require a contact closure for activation
Inputs may be individually programmed to monitor the host control panel
Includes 15 reporting formats, including the popular ADEMCO Contact ID format
$ 480.17In stock
Fire-Lite ECC-CE6 Speaker Circuit/Zone Expander Module
$ 2,207.98In stock
SBUS addressable, up to four EVS-125w per system
Each EVS-125W is supervised and has four onboard audio circuits expandable to eight with the EVS-CE4
EVS-125W uses an easy to install wire harness to connect the ECS-CE4 audio circuit expander
$ 1,191.56Only 5 left in stock
ntegrates directly with Silent Knight Series 6000 panels. Installation is easy as there is no need for special programming or a separate dialer capture module
Battery backup provided by the fire alarm control panel for enhance efficiencies and cost savings
Communicators provide dual path cellular and IP reporting capability when combined with 6000 series panels
$ 139.37Guaranteed In Stock!
4G LTE Network and IP Compatibility
Full Contact ID
256-bit AES Encryption
Diagnostic LEDs
$ 2,798.12In stock
UL Listed to UL2572 Communication (Control Units Mass Notification Systems).
Modular design for maximum system flexibility and easy expansion.
50 watts of 25 V audio power (expandable to 100 watts) RMS.
$ 417.44Only 14 left in stock
Supports most common alarm formats: Contact ID, SIA2, pulse (3×1, 4×2), modem lle, IIIa, and DMP
Transmits fire alarm signals through the Telguard Communication Center
Compliant with 2019 and earlier editions of NFPA 72
$ 310.49In stock
AT&T (HWF2A-COM)
Dual path communications to central station using Internet or LTE cellular technology
Requires no change to the existing Fire Alarm Control Panel configuration with connection to primary and secondary telephone ports
$ 135.69In stock
Instantly modernize most legacy security systems with mobile control
Video ready enabled through the alula mobile app
Home automation-ready, link to any z-wave device
Sunset-proof communicator, with ethernet and wifi onboard
$ 305.65In stock
Single or Dual Path Communications – Communicates using Internet, LTE Cellular, or both
IP Communications – Works over any type of customer provided Ethernet 10/100
Base network connection (LAN or WAN), DSL modem or cable modem
Supports both dynamic (DHCP), or public and private static IP addressing
$ 310.49In stock
ReplacesIPGSM-4G &IGSMCFP4G
AT&T (HWF2A-COM) and Verizon Wireless (HWF2V-COM) models available
Dual path communications to central station using Internet or LTE cellular technology
Requires no change to the existing Fire Alarm Control Panel configuration with connection to primary and secondary telephone ports
Works on Ethernet 10/100 ports
Base network connection (LAN or WAN), DSL or cable modem
$ 135.69In stock
Instantly modernize most legacy security systems with mobile control
Video ready, enabled through the alula mobile app
Home automation-ready, link to any z-wave device
$ 76.48In stock
4G LTE Network and IP Compatibility
Full Contact ID
256-bit AES Encryption
Diagnostic LEDs
Upload/Download
$ 213.13In stock
Front and back tamper for commercial fire/burglary installations
One or two receivers can be used to provide redundant coverage or extend coverage in large areas
Spatial Diversity System virtually eliminates “nulls” and “dead spots” within the coverage area
Connects to control panel via the keypad bus
$ 228.85In stock
Dual-path (LTE/Internet) for flexibility and redundancy
Alarm.com interactive services allow Z-Wave sensors, remote arm/disarm and other functions from web portal or smartphone application
Signal strength and trouble display
PC-Link connection
Fire alarm communication devices are crucial for ensuring effective and coordinated responses during emergencies. These devices enable clear and immediate communication between occupants and emergency responders, facilitating the quick relay of critical information. Our range of fire alarm communication devices includes emergency call boxes, intercom systems, and mass notification systems, all designed to provide reliable and efficient communication in various settings. Whether in a residential, commercial, or public space, these devices help ensure that everyone receives timely alerts and instructions, enhancing overall safety and response efforts during fire emergencies.
