Fire-Lite FCPS-24S8RB Master Control Replacement Board for FCPS-24FS8 Power Supply

Description

Master Control Replacement Board For The  FL-FCPS24FS8

The Fire•Lite FCPS-24FS8(C/E) is a compact, cost-effective, 8-amp remote power supplies with battery charger. The FCPS24FS8C/E) may be connected to any 12 or 24 volt fire alarm control
panel (FACP) or may stand-alone. Primary applications include notification appliance (bell) circuit (NAC) expansion (to support ADA requirements and NAC synchronization) or auxiliary power to support 24 volt system accessories. The FCPS provides regulated and filtered 24 VDC power to four notification appliance circuits configured as either two Class B (Style Y) and Class A (Style Z, with ZNAC-4 option module) or four class B only. Alternately, the four outputs may be configured as any combination of resettable/non-resettable power outputs (optimal for powering four-wire smoke detectors. The FCPS-24FS8(C/E) also contains a battery charger capable of charging up to 18.0 Amp hour batteries. The FCPS24FS8C is ULC-listed.

Features

• UL-Listed Notification Appliance Circuit (NAC) synchronization using System Sensor®, Wheelock®, or Gentex® “Commander2” appliances
•  Operates as a “sync-follower” or as a “sync-generator” (default) See note on page 2.
• Contains two fully-isolated input/control circuits – triggered from FACP NAC (NAC expander mode) or jumped permanently “ON” (stand-alone mode)
•  Two Class B (Style Y) or Class A (Style Z, with ZNAC-4 module) NACs (circuits 1 & 3)
•  8-amp full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864)
• 6-amp continuous output in stand-alone mode (UL 1481)