Fire-Lite I-300 Fault Isolator Module for Fire Alarm Control Panels
$96.31 & Free Shipping
- Powered by SLC loop directly, no external power required.
- Mounts in standard 4-inch square (2-1/8″ deep) junction boxes.
- Integral LED blinks to indicate normal condition. Illuminates steady when short circuit condition is detected.
In stock
Description
The FireLite I300(A) Fault Isolator Module is used with FireLite’s addressable fire alarm control panels (FACPs). It protects the system against wire-to-wire short circuits on the SLC loop. The I300(A) should be placed between each device on the SLC loop to isolate a short-circuit problem between the modules. It is required for true Style 7 operation so that other devices can continue to operate normally if there is a short-circuit on the SLC.
Application
The Fault Isolator Modules should be spaced between groups of sensors in a loop to protect the rest of the loop. Use to contain short circuit problems within a section of a loop so that other sections can continue to work normally. The I300(A) supports up toย 25 devices in-between isolators, except when using relay bases.
I300(A) Fault Isolator Moduleย Features and Benefits
- Generally used at each T-tap branch. This limits the effect of short circuits on a branch to the devices on that branch in Style 4 loops.
- Isolates devices so they can continue to operate normally in the event of a short-circuit on the SLC in Style 7 operation.
- Powered by SLC loop directly, no external power required.
- Mounts in standard junction boxes
- ย LED blinks to indicate normal condition.
- Supports a maximum of 25 devices in-between isolators, except when using relay bases.
Additional information
| Weight | 6 lbs |
|---|---|
| Item Condition | New |
| MPN | I300 |
| Brand |
